KLS New Type Vertical Centrifugal Pump

KLS New Type Vertical Centrifugal Pump

(1). Capacity: 1200m3/h

(2). Head: 125m

(3). Speed: 1450~2900r/m, 1750~3500r/m

(4). Size: 25~350mm

(5). Pressure: less than 1.6MPA

(6). Material: Cast Iron, Stainless steel

(7). Standerd : ISO2858, JB/T6878.2-93, BS EN733/DIN24255

(8). Structure: Vertical, single-suction, single-level, pipeline type

Design standerds and main material:

Design standerds: According to international ISO2858, JB/T6878.2-93, European BS EN733/DIN24255 standerds.

Structures: Vertical, Single-stage, Single-suction, Volute type, Pipeline type

Diameter for inlet and outlet: 25~350 (MM)

Flange standerd: PN16, optional: ANSI B16.5 Class 150LB

Pump: Cast Iron HT200, Stainless steel 304/316/316L

Impeller: Cast Iron HT200, Brass H65, Stainless steel 304/316/316L

Shaft: 45#steel, Stainless steel 2Cr13, Stainless steel 304/316/316L

Shaft sealing: Mechanical sealing

Characteristics:

(1). Generation improvement: the biggest improvement is the vertical standard motor, no extended shaft, and the shortest cantilever. The pressure of motor bearings is less than the other same kind pumps and therefore, it has a longer life. The shaft of old type pump is the stretch of motor shaft, and it can not realize the separation between pump and motor. KLS new pipeline centrifugal pump can separate the pump and motor completely, and it has a better corollary equipment and more standerdized.

(2). Smooth operation: The absolute concentricity of pump shaft and the static and dynamic balance of the impeller, ensure that the pump can be stable operated, and no vibration.

(3). Absolutly no leakage: The different materials of mechanical seal ensures no leakage in the process of transmiting different medium.

(4). Low noise: The water pump supported by two low-noise bearings have a stable running, and basically no noise except slight sound of motor.

(5). Low failure rate: The pump owns simple and reasonable structure and adopts the international first-class quality equipment, then the trouble-free time for the pump has been greatly improved.

(6). Easy maintenance: Easier to replace the seal, pump shaft and bearings. For the old type pump, the motor shaft has to be replaced if the there is damage to pump shaft, but the the KLS pump will not come with this problem. Due to the disassembling and installment type, the pump can be repaired without influencing the pipeline, therefore, it reduces mainteniance cost and maintenance difficulty greatly.

(7). Less space requirment: Because of the morden design and compact structure, the KLS pump has a smaller dimensions than IS type and other pumps.

(8). Medium’ temperature: The pump and motor are fission connected and the working temperature is greatly ascend, from --20 °C to 120 °C.

Usage:

KLS vertical centrifugal pump is widely used in cycle of cold, high building water supply, fire line pressurization, long-distance water, industrial production process circulation pressurization, garden sprinkler irrigation and irrigation; Conveying water or other liquid which has the similar chemical and physical properties with water.