CQB-G High Temperature Magnetic Pump

CQB-G High Temperature Magnetic Pump

1. Summarize

Magnetic centrifugal pump (magnetic pump) is usually constituted by electrical motor, magnetic coupling and corrosion-resistant centrifugal pump. Its main characteristic is the use of magnetic coupling transmission of driving force, there is no leakage, when the motor driven magnetic coupling outside of the rotating magnet, the magnetic line of force through the gap and isolation kits, acting on inside the magnet, so that pump rotor and motor synchronous rotation No mechanical contacts to transfer torque. The driving force in the shaft input, as the liquid has been closed every other kit in the static, no dynamic seal and therefore there is no leakage. High temperature magnetic pump flow components can be used in accordance with the needs of 304,304 L, 302,321,316,316 L, UB6, CD4MCu, titanium alloys, nickel-based alloy materials, such as decay. CQB-G type magnetic pump magnetic pump are national joint design team to develop a new type of completely non-leakage anti-corrosion pump. Its technical and economic indexes are similar as foreign products at the end of the eighties level. CQB-G Series magnetic pump type and the basic parameters in line with the TB/T7742-95 "small magnetic drive centrifugal pump" standards.

2. Usage

CQB-G type magnetic pump is applied in petroleum, chemical, pharmaceutical, metallurgy, electroplating, environmental protection, food, film laboratory, water treatment, defense and other industries. It is the ideal equipment for transporting flammable, explosive, volatile, toxic, rare and precious liquid and a variety of corrosive liquids.

3. Characteristic

It is applicable to the transportation system pressure max 1.6MPa, temperature below 100 degrees Celsius, the density below 1840kg/m3, viscosity of below 30x10-6m2 / s of non-hard particles and fibers in the liquid. If system pressure is greater than 1.6MPa, it can be special designed. The max work pressure: 15MPA, flux 3.2~100m3/h,outlet pressure: 8~80m rotate speed: 2900r/min